How to Install BMW Door Lights ?
BMW Door Lights is wireless especially designed for BMW modification fancier . It will not destroy your original car appearance because it doesn’t need any drilling to your lovely car .
However, Firstly you need to buy one set BMW door lights on the market or anywhere .Please pay attention that car door lights should without drilling on the car (Magnet Type). It doesn’t matter if you buy wrong type door lights which need drilling, you can check this article How to Install Ghost Shadow Led lights ?
Types of BMW Car Door Projector Lights :
1.Magnet BMW door lights : It use 3M tape to fix the lights on the door . This is also actually show below for the installation .
2.Drilling BMW door lights : It needs to do the dilling on door panel .You can check the ghost shadow lights installation
3.Professional BMW door lights : Remove the original led lights from door panel and replace it quickly by some simple tool .
BMW Car Door Projector Lights Installation Step :
1, Remove the cover from ghost shadow lights and put on the battery inside of the lights housing . AAA bateries 4.5V is needed . Your need buy it in addition because normally lights seller doesn’t provide it .
2, put the 3M tape one side on lights housing, You can get the tape from the lights together in the box which you bought .Let me give you a pointer. Make sure you cove the top area because the bottom area will be hanging out a little bit .It’s crucial that the top area gets.
3, Put the BMW door lights on the door panel, Try to put it in vertical for the plastic housing .So this light will go in line here.
4,Put the projector film on the right position of the lights housing, Norammly you can forget this step . Because the seller have already put the film inside of the lighting housing . But if you want to change other logo in future ,you can buy and change to another film .Just replace it !
5,Cleaning your car door step where you want to install the bmw door lights. If you do not clean it before ,the management could not stick on the step tightly and easilly fall off after your finishing installation .
6,Remove the tape from the magnet and put the magnet on the step position ,when lights keep the distance from magnet longer than 1- 2cm.you go it’s finally installed as you can see the magnet is just a line under the sensor .It is fully intact so when I’m going to open the door you will see that the lights logo .
7,The dazzle BMW door lights logo will display on the ground when you open the door and it will be turned off when you close the door.you can see it doesn’t look that bad either,especially in this bright light staff code,but it’s going to look even better when it’s outside in the dark.
It’s a very intelligent method and it requires literally.No hardware installation. No bring up the door.Anything is cheaper and it works really good.It can be installed in both left and right doors , Courtesy door light make your car artist moreover the atmosphere . Improving the grade of your car. If you are a car decoration fans and want to do more high technology decors on the car , Head Up Display and Car Dash Cam is good for your next choice .
Final Thoughs :
Different people have different thoughts . Some people buy the BMW door lights not only conside the easy installation but also the cheap cost . And they will choose the magnet type . But in future if you want to remove the 3M tape from your door panel it could be a problem . From the professional decoration view, professional BMW door lights could be the best choice .
Anyway ,if you want to choose LED logo lights for your cars ,you can vist our on line shopping store : https://carledlogo.com. We will provide one year full warrently !