How to Install Car Door Lights: Illuminating Your Vehicle’s Aesthetics

Door lights are often considered a small detail on a vehicle, but can yet enhance the aesthetics and functionality of a vehicle. Not only do they add style, but they also improve safety and convenience. Whether you want to project a logo or just illuminate the ground, door lights are a great addition to your car. In this comprehensive guide, we’ll walk you through the process of installing door lights so that your vehicle can make a lasting impression.

Understanding Car Door Lights

Car door lights, also known as door projectors or welcome lights, are small LED lights mounted near the bottom of a car door. They serve a dual purpose: enhancing the appearance of your vehicle and providing practical lighting for entry and exit. Some door lights can project logos or graphics onto the ground when the doors are open, adding a unique and attractive visual element.

Tools and Materials You’ll Need

Before you begin the installation, gather the necessary tools and materials:

1,Car Door Lights Kit: Ensure you have the right kit that’s compatible with your vehicle’s make and model.

s-l1600-67 How to Install Car Door Lights: Illuminating Your Vehicle's Aesthetics
2,Trim Removal Tools: Plastic trim removal tools are essential for safely removing interior trim pieces without causing damage.

s-l1600-67 How to Install Car Door Lights: Illuminating Your Vehicle's Aesthetics
3,Electrical Tape: You’ll use this to secure wires and provide insulation.

s-l1600-67 How to Install Car Door Lights: Illuminating Your Vehicle's Aesthetics

4,Zip Ties: For organizing and securing cables neatly.

The Step-by-Step Installation Process

Follow these steps to successfully install car door lights:

1. Prepare Your Work Area:

Select a well-lit and spacious area for working on your vehicle. Ensure you have enough room to move around comfortably and access all the car doors.

2. Gather the Necessary Tools and Materials:

Double-check that you have all the required tools and the car door lights kit before starting the installation.

3. Locate the Original Door Lights:

Identify the existing door lights on your vehicle. Typically, these lights are found at the bottom of the doors.

4. Remove the Existing Door Lights:

Use a flat-head screwdriver to carefully remove the original door lights. Be gentle to avoid damaging the surrounding area.

5. Prepare the New Door Lights:

If the new lights are not pre-assembled, connect the wires to the corresponding terminals. Double-check the connections to ensure they are secure.

6. Mount the New Door Lights:

Align the new door lights with the holes where the old lights were. Gently press them into place to secure them.

7. Connect the Wiring:

If the new lights are wired, follow the instructions provided with the kit to connect them. Typically, you’ll connect the positive and negative wires.

8. Test the Lights:

Open and close the car door to ensure the new lights are working correctly. Adjust their positioning if necessary to achieve a clear projection.

s-l1600-67 How to Install Car Door Lights: Illuminating Your Vehicle's Aesthetics

9. Secure Wires and Components:

Use zip ties and electrical tape to secure any loose wires and ensure they are organized and out of the way. This step helps prevent interference or damage.

10. Reassemble the Trim and Components:

Carefully reattach any trim or panels that were removed during the installation. Make sure they fit securely and look seamless.

11. Repeat for Other Doors:

Repeat the same process for all the other doors on your vehicle.

Tips for a Successful Installation

  • Follow the Instructions: Always refer to the specific instructions provided with the car door lights kit for your vehicle’s make and model.
  • Double-Check Connections: Ensure all connections are secure and properly insulated to prevent electrical issues.
  • Positioning is Key: Aim for a clear and centered projection of the logo or design onto the ground.
  • Test Before Finalizing: Test the lights thoroughly before reassembling and completing the installation to avoid any rework.


Installing door lights is a relatively very simple task that can immediately enhance the aesthetics of your vehicle while providing additional safety and convenience. With the right tools, materials, and careful reading of the installation steps, you can easily personalize your vehicle and make a lasting impression. Enjoy the improved aesthetics and functionality that door lights bring to your driving experience.


If you want to install the magnet door lights ,pls check the installation guide here:


Share Your Love

Leave a Comment: